| Main Pages |
 |
 |
 |
MHMT |
 |
 |
 |
Machine Tool Technology |
 |
Studer
S30 Designed for the grinding of workpieces in single component or small series production runs it is easy to operate and can be reset very quickly thus allowing the operator to concentrate on the grinding process. |
||
|
Specification |
|||
| Capacity | Between Centres | 650/1000mm | 25.6/39.4" | |
| Centre Height | 125/175/225mm | 4.9/6.9/8.9" | ||
| Max. compt Weight | 130kg | 286lbs | ||
| Cross Slide (X) | Traverse | 60 + 260mm (rapid + feed) | 2.36 + 10.2" | |
| Max Speed | 6mm/min | 0.24ipm | ||
| Longitudinal (Z) | Traverse | 700/1050mm | 27.5/41.3" | |
| Max Speed | 5,000mm/min | 197ipm | ||
| Table Swivel | 10/8.5 deg | |||
| Wheel Head | Manual Swivel | 0 to -180 deg | ||
| Drive Power | 5.5kW | 7.5hp | ||
| Wheel (left) (D x W x B) | 400 x 63 (80F5) x 127mm | 16 x 2.5(3.15) x 5" | ||
| (500mm diameter option) | ||||
| Wheel (right) (D x W x B) | 400 x 40 x 127mm | 16 x 1.6 x 5" | ||
| Speed | 35 - 50 m/s | 6886 - 9840sfpm | ||
| Internal | Location Diameter | 100mm | 3.15" | |
| Speed | 20,000/40,000/60,000rpm | |||
| Belt drive | ||||
| Work Head | Speed Range | 30 - 1000pm | (hydrodynamic) | |
| 35/90/210/520 rpm | (roller bearing) | |||
| Taper | MT5 | |||
| Drive Power | 0.55kW | 0.74hp | ||
| Load during Live Grinding | 100Nm (hydrodynamic) | 74 ft lbs | ||
| 160Nm (roller bearing) | 118 ft lbs | |||
| Tailstock | Taper | MT3 | ||
| Barrel Travel | 35mm | 1.37" | ||
| Diameter | 50mm | 1.97" | ||
| Control System | Control | Hydraulic infeed system |
| Studer S30 |
| © MH Machine Tools 2005 |